background image

37

36

The digitally-coded, inductive transmission 
technology used in this device is extremely reliable
and experiences virtually no interference from 
other devices. It should be noted, however, that when
operating the device near a computer terminal 
or other strong electromagnetic fields, it may be 
necessary to be at least 60 centimeters (24“) away 
to ensure proper operation.

If the hearing instrument do not respond to the 
device because of an unusual field disturbance,
move away from the disturbing field.

Use only original Phonak accessories.

Opening iCube might damage it. If problems occur
which cannot be resolved by following the remedy
guidelines in the troubleshooting section of this
user guide, contact your local Phonak representative.
iCube may only be repaired by an authorized service
center.

Important information

Do not make any changes or modifications to this
device.

Do not unplug the neckloop when iCube is saving
data to the hearing instruments. Keep the neckloop
closed when iCube is not in use or stored on the
iCube charger.

If you use several iCubes in the same building, be
aware that their inductive field can disturb one 
another if within a range of 2 meters (6 feet). This
may even occur when used in different rooms.

Do not use iCube while charging.

GA_iCube_GB._AK1_9.10.07.qxp  24.1.2008  14:27 Uhr  Seite 36

Summary of Contents for iCube

























Reviews: