Caring
together
Learning
together
Continuously
improving
Excelling
together
Step 6: Can my hearing aid work with the Loop System?
If you have had a hearing aid before or you have requested access to the Loop
system (T Setting) then this may be enabled on your new hearing aid.
Press the button on the top of the hearing aid once to change programme. The
hearing aid will make a noise alert when pressing the button (jingle sound =
normal start-up programme, 1 bleep = 2
nd
programme.
If the loop system has not been activated on your hearing aid pressing the button
will not result in any beeps or changes in your hearing aid settings.
Please see our video
Please note that when on an additional programme, the CROS microphone
is not active. It will become active again when returning to 1
st
programme
(default programme) or when the hearing aid has been switched off
