7
Stonex S900 Receiver
Receiver Appearance
The S900 series receiver is cylindrical with a diameter of 156mm, a height of 76mm and a weight of 1.2kg. The front side of
the receiver is control panel, which consists of a power button and four indicators. The bottom are interfaces of UHF
antenna and cables. PUSH buttons on both sides of the receiver are used to open the bottom battery cover.
Interfaces
The bottom interface of the instrument is shown below, and the protective plug covered on it is used for the dustproof and
waterproof of the external interface. The TNC connector is used to connect to the built-in radio antenna (Left: UHF interface).
The five-pin LEMO connector (Middle) is used to connect external power supply or external radio. The seven-pin LEMO
connector (Right) is used for data communication (data communication between the receiver and the computer and the
handbook).
Summary of Contents for Stonex S4II
