![background image](http://html1.mh-extra.com/html/phoenix/stonex-s4ii/stonex-s4ii_collection-manual_1551281062.webp)
62
Select a desired “Rinex Version”, “time Interval”, “Export Systems”, “ObsValue”, etc and leave the “Output path=Input
path” checked to export your Rinex file to same folder as your “.dat” file.
NOTE:
Disable “Set Station Coordinate With Single Point Position” if you want the Rinex to display the user defined
coordinates. Enable this option only if you want to use the first autonomously computed position.
7. Click on Export when you have configured all settings. If you left the “Output path=Input path” checked, the exported
Rinex file is located in the same folder as your “.dat” file.
Summary of Contents for Stonex S4II
