Phoenix Audio Technologies
- 10 -
www.phnxaudio.com
3) If you use the Phoenix Dial Pad with the Quattro2 (1L model only), connect it to the left (narrow) RJ
jack on the unit and use it to initiate a call, dial out and hang up a call. The Dial Pad comes with its
own instruction page.
4) If you wish to use the Phoenix dialing software
you can leave the left RJ jack on the unit open.
The software includes a full set of controls that
allow you to take a call, dial, hand up and flash.
Please refer to details on our website.
5) When using the Quattro2 with a telephone, L1 (or
L2) acts as a switch connecting the phone line to
either the Quattro2 or the telephone unit (refer to
the functional drawing on the next page). When
L1 is active (light is on) the Quattro2 is
connected, when it is inactive (L1 light is off) your
telephone is connected.
6) Please follow these steps to conduct a
conference call using a telephone:
a. Dial out: pick-up your telephone’s handset
and dial the number you want to call. At
any time after dialing push L1 (or L2 if you
dialed using line 2) to transfer the call to
your Quattro2. The Quattro2 is now
connected to the line and your telephone
is disconnected. As such the telephone is
currently not functional and you cannot
utilize its dial-pad, unless you switch the
call back to your telephone (see c. below).
PSTN Connection
Diagram using a
telephone
