![background image](http://html.mh-extra.com/html/phoenix/quattro2/quattro2_user-manual_1551174009.webp)
Phoenix Audio Technologies
- 8 -
www.phnxaudio.com
5. Using the Quattro2 with Your Computer - Connection and Operation
1) Plug the USB cable (supplied) into the Quattro2 on one end, and to your computer on the other end.
2) The unit will turn on automatically (blue light is on as
an indication). The unit will identify itself as
Phnx
MT301
. In most cases the Quattro2 will become
your system’s default audio device. In some cases
(depending on the application you are using and on
the operating system you are running) you’ll have to
select the Quattro2 as your Audio Input and Output devices.
Note: if for some reason the unit does not turn on automatically when you plug it in, please push the
Power button to turn it on.
3) You can control the unit’s pickup level (microphone) using your computer’s audio controls. You can
control the unit’s playback (speaker) level using either the computer’s audio controls or the unit’s
Volume Up / Volume Down controls.
Note: Phoenix offers a free downloadable Audio Setup Utility that will help you setup the pickup level as
well as the playback levels. Although not required, this is especially helpful when working with a
secondary interface. The settings can then be stored on the unit such that they become the unit’s default
settings even when working later with the unit in a stand alone configuration (when the unit is no longer
connected to the PC).
4) Push the power button with a short push to toggle between Microphone On and Mute. When muted –
the light will blink.
5) Push and hold for 4 seconds to turn the unit off (the unit will beep four times and turn off on the fifth).