Phoenix Audio Technologies
- 13 -
www.phnxaudio.com
Using external speakers with the VCA interface
If you wish to use your VC’s speakers you can either:
1) Connect the VC out to the right RCA jack, and connect your speakers to the 3.5mm “external
speakers” jack on the Quattro’s primary panel.
Or
2) Using a RCA Y cable, split the VC out, connect one end to the Quattro (right RCA jack) and the other
end to your speakers. This way requires less cables running back and forth from your VC to the
Quattro. Note that in this configuration the Quattro’s internal speaker will work in addition to the
external speakers. If you wish to disable the internal loudspeakers you can plug a Dummy 3.5mm
plug into the 3.5mm jack (in the primary interface panel). Such dummy plug can be purchased
separately (you can use any 3.5mm plug for this purpose).
Dummy Plug (Optional)
Quattro Out
VC Speakers Out
