Installation Instructions
Meridian Series
Phoenix Lighting
8711 West Port Avenue Milwaukee, WI 53224 USA
Phone: +1 414.973.3300 Toll Free: 800.438.1214 Fax: +1 414.973.3210
www.phoenixlighting.com
2
Wiring
1.
Using a Phillips head screw driver, remove cover from the supply power junction box.
2.
Pull the main power cord through the open cord grip into the junction box.
3.
Make wiring connections per the diagram below (Figure 4). Gently pull on each wire to ensure terminals are tight.
4.
With jacket of power cord visible inside junction box, tighten cord grip, hand tight plus ¼ turn.
5.
Reattach junction box cover. Tighten screws to 0.8 N-m.
incoming power
line
ground
neutral
N
G
L
fixture cord
black
ground
white
Figure 4
Trunnion Mount
1.
Verify the voltage listed on the product label is the same as the voltage to be supplied to the fixture.
2.
Attach fixture to a structure suitable to the weight and size of the fixture using two (2) 12 mm stainless steel screws (not provided). Tighten bolts
to 54-60 N-m. If mounting to a vertical surface, mount with junction boxes below the mounting bracket if space allows (see Figure 3).
Figure 3
451 mm (17.74 in)
60 mm (2.
36 in)
194 mm (7
.6
2 in)
250 mm (9.84 in)
13.9 mm
supply power junction box
control box
