7. Life phases
42
7.4.3 Assembly on the outer profile or the profile groove
For assembly, proceed as follows:
•
Swivel the slot stone -RF- (included in the scope of delivery) into the profile groove.
•
If desired, push the cover profile (included in the scope of delivery) into the profile groove. If
necessary, shorten the profile.
When fixing the respective components, it is essential to observe the recommended minimum screw-in
depths as well as the recommended tightening torque.
7.5 Connecting the controls/hand switches
You can connect the MultiControl II and Compact-e-3-EU controller to the lifting column.
The lifting column is connected to the external controller.
The controller is not in the lifting column.
7.6 Operating the external controller
Information on how to operate the external controller and the hand switch can be found in the respective
assembly instructions.
Use only the controllers listed in this operating instruction.
This may otherwise lead to damage to the lifting columns or controllers.
Ensure that nobody is in the vicinity of the drive when the lifting column is moving.
Therefore, only use the hand switch if you can see the lifting columns – risk of acci-
dent!
Cover profile
Slot stone -RF-
