Phoenix Mecano RK Rose+Krieger Easywork, Operating Instructions Manual

Page: 87 / 112

4 Transport and storage
NOTICE!
The assembly workstation must not be commissi-
oned if the lifting column is damaged.
Immediately check the delivery upon receipt to ensure that it is
complete and free from transport damage. Report the extent of the
damage to the person responsible and to RK Rose+Krieger GmbH
immediately.
WARNING!
Risk of injury due to improper transport!
Loads can swing out, topple over and fall during lifting
operations. This can cause severe injuries.
– Never step under or into the pivoting range of sus-
pended loads.
– Only use approved lifting gear and load suspen-
sion devices with a sufficient load-bearing capacity.
– Do not place load-bearing equipment, such as
lifting straps and belts, over sharp edges and cor-
ners. Do not knot or twist them.
– Lift the assembly workstation carefully and observe
whether it topples. If necessary, adjust the fas-
tening.
– Be aware of the assembly workstation’s centre of
gravity.
– Wear an industrial hard hat.
Transport inspection
Transport
Transport and storage
29.05.2019 Assembly workstation RK Easywork 87