Phoenix Mecano Komponenten AG
23
7.4.1
Installation procedure
1.
Hang the rear suspension onto the counterpart piece.
Attention: The counterpart piece may not be able to rotate. The electric cylinder must be able to be rotated in the direction of
the arrow (see figure).
2.
Fix the suspension at the front.
Attention: The counterpart piece may not be able to rotate. The electric cylinder must be able to be rotated in the direction of
the arrow (see figure).
3.
Connect the connection cables in accordance with the connection diagrams
AP.4.017 661 a
nd
AP.4.017 661
(see Chap.: 6.6)
4.
Perform the test run / initial run without load and check operability of the system.
