14
6.5
Overview diagram of the electric cylinder
Connection cable with plug
Transmission
Guide nut
Control board
Mounting adapter, rear
Pushrod
Motor
Spindle
Mounting adapter, front
6.6
Connection cable with plug / connection diagrams
A connection cable with a compatible plug is supplied as standard for electric cylinders of the LD75E+P
series.
Please note that the specified protection class IP69k (static), resp. IP65 (dynamic) for the electric cylinder LD75E+P
is only provided with a correctly mounted connection cable with plug! In order to guarantee a high IP protection class, we recommend that
the free cable end is laid and connected in such a way that it is inside a protected area (e.g. junction box, switch cabinet, machine
enclosure, etc.).
The connection cable with plug is available in the following lengths (measured from the edge of the housing with a tolerance of ±150mm):
Total cable length L = 1500 mm
Total cable length L = 3000 mm
Total cable length L = 5000 mm
When assembling/disassembling the connection cable, please ensure that the plug is correctly inserted in the plug socket pro-
vided for this purpose and avoid using undue force (
Recommendation:
lightly grease the seal). Ensure that the connecting
cables are laid correctly, in order to eliminate trip hazards.
