CU458-2
General Information
93728 1.0
5
1. General Information
1.1
Configurations
The designation CONTROL UNIT is used in these installation instructions to refer to the CONTROL
UNIT CU458-2.
1.2
About these installation instructions
In order to install the CONTROL UNIT successfully and safely in the end product, these installation
instructions must be observed. These instructions are not an operating manual for the end product.
These instructions will help you to minimize danger, repair costs and down times. They will also
help you to increase the reliability and lifespan of the device.
CAUTION
The notices in these instructions must be followed! Following the guidelines during installation
and connection procedures will help to minimize:
•
the risk of accident and injury, and
•
damage to the CONTROL UNIT or the end product.
These installation instructions have been written with due care and attention. However, we cannot
guarantee that the data, images and drawings are complete and correct nor do we accept any lia-
bility for the information contained therein, unless required by law.
1.3
Conventions used
Notices which do not relate to safety are indicated in these instructions with a symbol:
Triangular notice symbol
Explanations of warning notices
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moder-
ate injury.
NOTICE
NOTICE is used to address practices which are not related to personal injury but may result in
damage to the product or surroundings.
Summary of Contents for Dewert Okin CU458-2
Page 2: ......
