4
a)
Technical Data
Rated voltage..........................................................:
24 V DC
Power consumption with rated load........................:
m
permissible push force............................................ :
max. 4000 N (6000 N) (depending on version)
permissible pull force.............................................. :
max. 4000 N
Operating mode with max. rated load................... :
Intermittent duty (AB) 2 min./18 min.
Protection classification.......................................... :
Noise level.............................................................. :
................................................................:
Single drive
Type of load............................................................ :
Push; pull
Stroke .................................................................... :
Adjustment Speed ................................................. :
Protection category................................................. :
IP20
Colours....................................................................:
grey; black
Emergency release “ER”........................................ :
500 N, 1500 N and 2000 N
Quick release “GQR”.............................................. :
Cable for permanent mains installation or
cable with attached plug
Length x width x height of the drive.........................:
min. 175 x 160 x 88 mm (without adjustment)
Weight.....................................................................:
approx.
Room temperature.................................................. :
from +10° to +40° C
Relative humidity.....................................................:
from 30% to 75%
Barometric pressure................................................:
from 700 hPa to 1060 hPa
1)
2)
3)
Dimensions and Weights
Ambient Conditions
min. 175 x 185 x 88 mm (with “ER”)
min. 221 x 160 x 88 mm (with “GQR”)
1)
2)
3)
Operating mode =
.
., i.e. run for a maximum of 2 min. under rated load, then
observe a
of 18 min. Operational failure could otherwise result.
Data deviating from these standard values can be established after consultation and depending on the application.
Adjustment speed = at which the clevis travels (speed varies according to the load).
intermittent duty (AB) 2 min /18 min
rest period
speed
without load
ax. 5 A DC (depending on application)
(depending on version)
III
65 dB(A)
Drive type
< 425mm
to 38.5 mm/s (depending on version)
(IP44, IP66 optional)
up to 3000 N
Cable versions........................................................ :
1.7 kg (depending on version)
MEGAMAT
2
11/2008
ID-Nr. 48148
