12
Please note:
Bowden cable (2)
Bowden cable receptacle (1)
To allow actuation, a suitable commercially available is provided.
This is fastened in the (not part of the supply
package).
GQR (Quick Release) features a high quality gear system which can be actuated at
any time, also in the loaded state.
Thread the Bowden cable fully through the groove in the
and into the cable bolt at the top, then secure the Bowden cable in
place with the
.
The tension of the Bowden cable should be too tight, otherwise this could result
in unintentional disengagement or cause the clutch in the GQR's gear system to
slip which in turn can lead to damage.
In order to ensure that the GQR functions correctly, a release travel of 5.5mm ±
1mm be maintained to enable actuation of the Bowden cable.
The Bowden cable must now be tested to ensure that it is in perfect working order.
The GQR system is designed as a standard feature to be used for applications in the
. When actuating the GQR, it is therefore important to ensure that
the manual adjustment takes place in the .
.
Moreover, another standard feature of the GQR is the trap protection for emergencies.
.
Bowden cable
receptacle (1)
locking pin (3)
not
must
drive's push direction
intended direction only
Non-observance can cause the GQR to sustain damage
Non-designated actuation of the trap protection (operating the quick release
without actuating the Bowden cable in the opposite direction to the designated
direction) leads to increased wear and premature failure of the system.
Please draw attention to this in your operating instructions
Attention!
(1)
(2)
(3)
(2)
MEGAMAT
2
11/2008
ID-Nr. 48148
