SPECIFICATIONS
C
OMMON
T
O
A
LL
M
ODELS
•THD at rated power 4 ohms ..............................0.02%
•Frequency response ...................... 20-20kHz +/- 1dB
•Signal to noise ratio ..........................................>100dB
•Input sensitivity ...................................... 200mV to 2V
•Idle current .......................................................................1A
•Dampening factor @ 1kHz .......................................250
•Min to Max voltage requirements ................10.5-15V
•Dimensions: SA1.0 & 1.0x: ........8.00
x
8.25
x
2.00
SA3.0x: ..................8.00
x
9.50
x
2.00
SA1.4x: ....................8.00
x
13.10
x
2.00
SA1.5x: .................. 8.00
x
15.50
x
2.00
O
UTPUT
P
OWER
- M
ODELS
AVAILABLE
IN
S
ELECTED
R
EGIONS
1.0x - 2 Channel Amplifier
Into 4 ohms @ 12/13.8vDC ....................30/40 WRMS
Into 2 ohms @ 12/13.8vDC ....................45/60 WRMS
Bridged into 4 ohms @ 12vDC ........... 90/120 WRMS
Total Dynamic Power ..................................... 240 Watts
SA3.0x - 2 Channel Amplifier
Into 4 ohms @ 12/13.8vDC ...................75/100 WRMS
Into 2 ohms @ 12/13.8vDC .................. 110/150 WRMS
Bridged into 4 ohms @ 12vDC .......220/300 WRMS
Total Dynamic Power .....................................480 Watts
4
RATED OUTPUT POWER
C
ONTINUOUS
O
UTPUT
P
OWER
P
ER
C
HANNEL
SA1.0 - 2 Channel Amplifier
Into 4 ohms @ 12/13.8V DC ......................30/40 WRMS
Into 2 ohms @ 12/13.8V DC ......................45/60 WRMS
Bridged into 4 ohms @ 12/13.8V DC ....90/120 WRMS
Total Dynamic Power ..........................................240 Watts
SA1.4x - 4 Channel Amplifier
Into 4 ohms @ 12/13.8V DC ......................30/40 WRMS
Into 2 ohms @ 12/13.8V DC ......................45/60 WRMS
Bridged into 4 ohms @ 12/13.8V DC ....90/120 WRMS
Total Dynamic Power ......................................... 480 Watts
SA1.5x - 5 Channel Amplifier
Into 4 ohms @ 12/13.8 V DC .....................30/40 WRMS
Into 2 ohms @ 12/13.8 V DC .....................45/60 WRMS
Bridged into 4 ohms @ 12V DC ...............90/120 WRMS
Subwoofer Out into 4 ohms @ 12V DC 90/120 WRMS
Subwoofer Out into 2 ohms @ 12V DC .110/140 WRMS
Total Dynamic Power .........................................600 Watts
A WORD ABOUT OUTPUT POWER
At Phoenix Gold, we rate power output of an amplifier
at two different voltages. Without your engine
running, the amplifier is operating at 12 volts I.E.
(worst) case. At 13.8 volts (engine running)
the amplifier will produce more power!
GOLD
