1. Power Ground (B- Chassis Ground):
We recommend using Phoenix
Gold PRO10B or PS9R ground cable for a clean connection.
2. Power Input (B+ Positive 12 Volts DC):
This 24kt Gold (3) position
barrier type connector is designed to accommodate up to 7 gauge
power cable with our PRO81/82’s. We recommend our PRO10/7R or
PS9/7R power cable and always use the same gauge ground cable.
3. Remote Turn-On:
Connect the automatic antenna lead or "remote"
12V DC lead from source unit to this terminal. This connection allows
the amplifier to be turned ON and OFF at the source unit.
4. RCA Inputs:
This (5) channel amplifier has front and rear pre-amp
inputs. When all (4) inputs are used, front and rear channels
fade and subwoofer is not affected by the preamp fader. All
channels may also be driven by using front inputs only.
5. Gain Adjustment:
Adjustment of the amplifier to produce full power
between 0.2 - 2.0 Volts.
6. Crossover Adjustment:
This amplifier has front, rear & subwoofer
crossovers ranging from 30Hz to 500Hz. Front and rear outputs
are stereo high pass and the Subwoofer output is a summed mono
low pass.
7. Power On LED:
Indicates the amplifier is receiving 12V DC at the B+
and Remote input terminals. The amplfier is “On”.
8. Speaker Outputs:
This specially designed (10) position 24kt Gold
barrier connector, accepts up to 10 gauge speaker wire. We suggest
termination with a Phoenix Gold PRO404 spade terminal.
Rem
B+
B-
PWR
L
R
L
R
FRONT
REAR
SUB
+
-
IN THE USA
MADE WITH PRIDE
S
A1.5
Sapp
hire
b y P
h o e
n i x
G o l
d
x
8
7
1
2
3
.2
.2
.2
2
2
2
500
500
500
30
30
30
L
R
GAIN
GAIN
FREQ
FREQ
FRONT
FREQ
GAIN
L
R
REAR
SUB
5 CHANNEL
A M P L I F I E R
S
A1.5 x
4
6
5
6
5
6
5
4
SA1.5x
CONTROLS
& FUNCTIONS
7
