.2
.2
2
2
500
500
30
30
L
R
GAIN
FREQ
FRONT
FREQ
GAIN
L
R
REAR
HIGH
LOW
4 CHANNEL
A M P L I F I E R
S
A1.4 x
4
5
6
7
7
6
5
4
Rem
B+
B-
PWR
IN THE USA
MADE WITH PRIDE
S
A1.4x
Sapp
hire
b y P
h o e
n i x
G o l
d
+ LEFT -
+ RIGHT -
F
R
3
2
1
8
9
1. Power Ground (B- Chassis Ground):
We recommend using Phoenix
Gold PRO10B or PS9R ground cable for a clean connection.
2. Power Input (B+ Positive 12 Volts DC):
This 24kt Gold (3) position
barrier type connector is designed to accommodate up to 7 gauge
power cable with our PRO81/82’s. We recommend our PRO10/7R or
PS9/7R power cable and always use the same gauge ground cable.
3. Remote Turn-On:
Connect the automatic antenna lead or "remote"
12V DC lead from source unit to this terminal. This connection allows
the amplifier to be turned ON and OFF by the source unit.
4. RCA Inputs:
This four channel amplifier has front & rear pre-amp
inputs. Typically all CD players and AM/FM cassette
decks with RCA connections are compatible.
5. Gain Adjustment:
Allows amplifer to produce full
power output when input voltage is between 0.2 - 2.0 volts.
6. Crossover Adjustment:
This amplifier has front & rear adjustable
crossovers ranging from 30Hz to 500Hz.
7. High / Low Pass Switches:
These switches select either High Pass
or Low Pass for the front and rear channels.
8. Power On LED:
Indicates the amplifier is receiving 12V DC at the B+
and Remote input terminals. The amplifier is “On”.
9. Speaker Outputs:
This specially designed (8) position 24kt Gold
barrier connector, accepts up to 10 gauge speaker wire. We suggest
termination with a Phoenix Gold PRO404 spade terminal.
GOLD
SA1.4x
CONTROLS
& FUNCTIONS
6
