Starting up the printer
106876_en_01
PHOENIX CONTACT
9
2
Starting up the printer
2.1
Unpacking and setup
Scope of supply
–
Printer including battery pack and ink ribbon cartridge
–
Wide range power supply unit and one power cable each for Europe and the
USA
–
USB cable
–
Two printing magazines
Magazine for UCT material (TMP–UCT–MAG1, 0803342)
Magazine for US material (TMP–US–MAG1, 0803341)
–
Printing materials (ten UCT-TM 6, ten US-EMLP(85,6X54)) and print sample
from outgoing inspection of the device
–
DVD with driver and CLIP PROJECT Marking software. The DVD also con-
tains this user manual in several languages.
Unpacking
•
Check the printer for transport damage.
•
Retain the original packaging for subsequent transport.
Requirements for the installation location
•
Place the printer on a level surface.
Unlocking the transportation safeguard
Figure 2-1
Unlocking the transportation safeguard
•
Move the slider to the
position.
NOTE: Damage to the printer
Do not operate the printer near high-voltage lines.
Place the printer in a dry location protected from splash water. Protect the printer
and printing materials from humidity, moisture, and dirt.
Summary of Contents for THERMOMARK PRIME
Page 2: ......
