Phoenix Contact THERMOMARK PRIME User Manual Download Page 5

106876_en_01

PHOENIX CONTACT

5

Published by

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstraße 8

32825 Blomberg

GERMANY

Should you have any suggestions or recommendations for improvement of the 

contents and layout of our user manual, please send your comments to:

[email protected]

General Terms and Conditions of Use for technical documentation

Phoenix Contact reserves the right to alter, correct, and/or improve the technical documentation and the 

products described in the technical documentation at its own discretion and without giving prior notice, in-

sofar as this is reasonable for the user. The same applies to any changes that serve the purpose of tech-

nical progress.

The receipt of technical documentation (in particular user documentation) does not constitute any further 

duty on the part of Phoenix Contact to furnish information on modifications to products and/or technical 

documentation. You are responsible for verifying the suitability and intended use of the products in your 

specific application, in particular with regard to observing the applicable standards and regulations. All in-

formation made available in the technical data is supplied without any accompanying guarantee, whether 

expressly mentioned, implied or tacitly assumed. 

In general, the provisions of the current General Terms and Conditions of Phoenix Contact apply exclu-

sively, in particular as concerns any warranty liability.

This user manual, including all illustrations contained herein, is copyright protected. Any changes to the 

contents or the publication of extracts of this document is prohibited.

Phoenix Contact reserves the right to register its own intellectual property rights for the product identifica-

tions of Phoenix Contact products that are used here. Registration of such intellectual property rights by 

third parties is prohibited.

Other product identifications may be afforded legal protection, even where they may not be indicated as 

such.

Summary of Contents for THERMOMARK PRIME





































Reviews: