Starting up the printer
106876_en_01
PHOENIX CONTACT
11
2.3
Connecting the power supply
Use a power supply unit or a battery pack to operate the printer.
If the printer is connected to the power supply via the power supply unit, the battery
pack will be automatically charged in the printer.
If you want to permanently operate the printer via the mains only, without the bat-
tery pack, you can insert an empty battery pack housing instead of the battery pack.
Optional accessories
–
Replacement battery pack (TMP/ACCU, 0803668)
–
Battery pack housing (TMP/ACCU COVER, 0803669)
–
Replacement power supply unit (TMP/EXT.POWER-SUPPLY 100-240V,
0803672)
2.3.1
Connecting the power supply unit
The THERMOMARK PRIME is designed for power grids from 100 to 240 V AC.
Only connect the printer to sockets with a ground conductor contact.
Figure 2-3
Mains connection
•
Connect the connecting cable of the power supply unit to the socket on the
printer.
•
Insert the power cable in the mains socket.
•
Connect the power cable to a grounded socket with a ground conductor con-
tact.
•
Switch the power supply unit on at the switch.
Summary of Contents for THERMOMARK PRIME
Page 2: ......
