Phoebe LED Spectrum 10W RGB, Installation Instructions Manual

Page: 10 / 28

10 Installation & App Instructions
3.2 Editing a Light Name
Open the settings menu and select “Lights”.
From the list of network lights, press and hold the name of the desired light you
want to edit.
The control app will then display the light set-up screen where the light name can
be edited.
3.3 Network Test
To identify which lights are connected to the Bluetooth network and to test for
faults you can perform a network test. To perform a network test, follow these steps.
Step 1
Open the settings menu and select “Lights”.
A full list of lights connected to the network will be displayed.
Step 2
Press the ‘test network’ icon. Lights that are connected to the network will flash.
Lights that do not flash are not connected to the network.
Step 3
Follow the instructions on page 8 to add lights to the network.