Phocos ECO-N-T Series, User Manual

Page: 19 / 90

This equipment is suitable for use in Class I, Division 2 groups A, B, C, D or non-hazardous locations
only.
The hazardous location temperature code is T4.
UL listed to UL1741 and CSA C22.2 No. 107.1-16.
UL listed to ANSI/ISA 12.12.01-2015 and C22.2 No. 213-15.
Battery Type
Suitable for use with lead acid (GEL, AGM, flooded) batteries.
Nominal voltage rating of the battery: 12 or 24 V
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions for models ECO-N-10-T and ECO-N-20-T that shall be
followed during installation and maintenance of the charge controller.
CAUTION – A battery can present a risk of electrical shock, burn from high short-circuit current, fire or
explosion from vented gasses. Observe proper precautions.
WARNING - EXPLOSION HAZARD - Do not disconnect while circuit is live unless area is known to be
non-hazardous.
Always ensure batteries are properly ventilated.
Please do not disassemble or attempt to repair Phocos products. Phocos charge controllers do not
contain user serviceable parts.
The controller warms up during normal operation.
17