Phobos P430, User Manual

Page: 25 / 81

NetWare protocol stacks subsequently bound to the master port will
then see all traffic entering and leaving all ports in the group; any protocol
stacks bound to the other "slave" ports will not receive any traffic.
N O T E :
When using the NetWare INSTALL or INETCFG programs, you
must still bind at least one protocol stack to each instance of the
PhobosLink driver (i.e., to each slave port as well as to the master
of the group); otherwise the INSTALL/INETCFG utility will not
load the PhobosLink driver for that port at all. To work around this
problem, we recommend that you simply bind the IPX protocol
stack to each slave port using the randomly-chosen network number
suggested by the INSTALL/INETCFG program; since the protocol
stacks bound to the slave ports will not transmit or receive any
actual network traffic, the exact protocol stack settings do not
matter. If you wish to avoid having these extra protocol stack
bindings loaded at all, you can manually edit the AUTOEXEC.NCF
file using the INSTALL or EDIT utility after installing the driver,
and delete the unnecessary BIND commands while leaving the
LOAD PHBSLINK commands intact.
I
N S T A L L A T I O N U S I N G T H E
I N S TA L L
P R O G R A M
:
1. At the NetWare console screen, type LOAD INSTALL.
2. At the "Installation Options" menu, select "Driver Options."
3. At the "Driver Options" menu, select "Configure Network Drivers."
INSTALLING
DRIVER
SOFTWARE