background image

GC9940

2-16

 

- Power  Maximum  

:  2300 W at 230 V, 10 A

 Boiler : 

1370 

W

 Iron  : 

800 

W

 

Fan 

:    40 W

 

- Voltage  

: 230 V

 

- Frequency 

:  50 - 60 Hz

 

- Weight (product) 

:  20 kg

 

- Weight (with package)  :  24 kg

 

- Product dimensions 

:  46.6 x 46.7 x 79.7 cm (L x W x H)

in storage mode

Start-up time

Approximate 2 mins
Approximate 5 mins if automatic calc-cleaning is activated

Anti-Calc Cartridge

The anti-calc cartridge in the water tank removes calc from 
the water, hence preventing calc from building up in the 
system. 

1 cartridge can effectively treat up to 14 full tanks of water 
before depletion.  This is approximately 3 months of usage for 
a light or moderate user.

Replace the anti-calc cartridge when the red REPLACE 
CARTRIDGE  light is on.

Active ironing board

The ironing board has 2 portions:  Passive & Active board. 
The longer portion is the Active board.  The Active board is 
specially shaped for shirt or blouse during ironing.  It also 
has a bi-directional fan that offers suction or blowing during 
use.  For optimized performance of the appliance, fan is 
permanently on during use. 

Auto Calc Cleaning System

When the Auto Calc Clean process is activated, the blue 
Auto Calc Clean light blinks and there will be beeping 
sounds.  This process takes place for ~3min. During this time, 
it is normal to hear pumping and clicking sounds from the 
system.
After ~3 min, rinse water is flushed into the rinse tank below, 
the beeping becomes faster and the red light blinks on the 
rinse tank.  Pull out the rinse tank & empty its content into 
the sink.  Put back rinse tank in place, the beeping and the red 
light blinking will stop.
The Auto Calc Clean process is now completed.
The green power-on light will come on.
The appliance will heat up and steam is ready for use in 
~2 min.
The Auto Calc Clean process is automatically activated the 
first time you use the iron after you replaced the anti-calc 
cartridge

Optimal TEMP Iron

The iron is preset with the perfect combination of steam & 
temperature on all fabrics with:
•  Cyclonic steam chamber
•  Smart control processor

With perfect combination of steam & temperature,

•  No adjustment is required.
•  Safe on all delicate fabrics.
•  Fast & effective on the toughest fabrics.

TECHNICAL INFORMATION

Summary of Contents for WardrobeCare GC9940

















Reviews: