— 17 —
To check, edit or erase the
programmes
1 Turn on the VCR
and TV.
2 Press
VCR
.
3 Press
TIMER
.
4 Press
PLAY
5 or
STOP
∞ to select “PROGRAM
REVIEW” then press
OK/STATUS
.
The list of the timer recording
programmes appears.
5 Press
OK/STATUS
repeatedly to
view the more detailed programme
information.
• When you press
the button for the
first time, the
detailed program-
me information for
Programme 1 appears. By pressing this
button repeatedly, you can review the
detailed information of all other
programmes.
6 If you want to change the
programme setting shown on the
TV screen, press the following
buttons:
CH
5/∞
: Changes the channels.
START +/–
: Changes the start time.
STOP +/–
: Changes the stop time.
SPEED
: Changes the tape speed.
DATE +/–
: Changes the date.
If you want to erase the
programme setting shown on the
TV screen, press
CLEAR
. The
detailed information of the next
programme appears.
7 If necessary, press
TIMER
to exit
from the menu operations.
Note:
This function does not work for OTR (One
Touch Recording).
When two programs overlap
The Program Review
screen will appear
with a magenta line
blinking on the newly
set timer recording,
while the other overlapped programme
blinking.
1 Press
PLAY
5 or
STOP
∞ to move
the magenta line among the two
overlapping programs.
2 Press
OK/
STATUS
to view
the detail
information of the
program you want
to change.
3 Go to step 4 through 8 to modify the
selected program. To cancel any
timer recording, press
CLEAR
.
• If you do not modify the overlapping
programs, the VCR will record the earlier
program completely. Only the remaining
part of the later program will be recorded.
• If the START time for the two programs
are same, the lower program number will
be recorded.
Useful function for Timer
Recording: Auto Tape Speed
With this function activated, the VCR
can change the tape speed and record
the programme in LP or SLP mode
unless enough tape remains for
recording in SP mode.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“VCR SET UP” then
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“TIMER REC SPEED.”
5 Press
FF
3.
Each time you press the button, the
setting changes.
AUTO:
Select this to allow the VCR to
change the tape speed from SP to
LP or SLP when there is not
enough tape length remaining.
MANUAL:
Select this not to allow the VCR to
change the tape speed.
6 Press
MENU
to exit from the menu
operations.
PR CH START STOP DATE
1 12 08:00 10:00 15/06
2 10 10:00 10:45 MON
3 45 03:00 03:15 D15/10
4 25 11:30 13:00 DAILY
5 20 20:00 21:00 W18/10
6
7
8
NEXT:OK END:TIMER
1
2
3
4
5
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 00
STOP +/– 10 : 00
REC SPEED SP
DATE +/– 21/07/00
FRIDAY
ERASE: CLEAR
CONFIRM: OK END: TIMER
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 00
STOP +/– 10 : 00
REC SPEED SP
DATE +/– 15/06/00
THURSDAY
ERASE: CLEAR
NEXT: OK PREV: END: TIMER
12
PR CH START STOP DATE
1 12 08:00 10:00 15/06
2 10 10:00 10:45 MON
3 45 03:00 03:15 D15/10
4 25 11:30 13:00 DAILY
5 20 20:00 21:00 W18/10
6
7
8
NEXT: OK END: TIMER
How to see the programme list
1 Programme numbers
2 Preset channel numbers
3 Start time
4 Stop time
5 Start date
“D” stands for “DAILY,” and “W”
stands for “WEEKLY.”
• If the programme has worked
once for the Daily recording,
“DAILY” will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the day of the week (in this
example, “MON”) will be shown
instead of the start date.
Note:
• Even if a power failure occurs, the VCR
keeps your timer programs. However, the
clock time and other menu settings are
lost if it lasts for more than 10 minutes.
As a result, when the power is supplied
again to this VCR after the power failure,
set the clock time and turn off the VCR.
Each timer program you have made will
start unless its start time already passes.
PR CH START STOP DATE
1 12 08:00 10:00 D21/07
2 25 11:00 13:00 10/08
3 03 09:00 11:00 FRI
4 45 03:00 03:15 W15/10
5
6
7
8
SELECT: CONFIRM: OK
vr210/410/55
00.3.6, 1:10 PM
17
