Philips VoiceTracer DVT4010, User Manual

Page: 27 / 58

27
Record
Table of contents
5.1.2 Add index marks
Index marks can be used to mark certain points in a recording as
points of reference. Press
h
/
b
to select index marks (see also
chapter 6.2 Play back a recording or music file, page 30) .
1
Press the INDEX/
a
key during recording to add an index mark.
X
The index number is displayed for one second. Up to 32 index
marks can be set per file.
Tip
• You can also add index marks while the recording is paused.
5.1.3 Recording using the Zoom function (DVT6010 –
DVT8010)
Use the zoom function to focus on the front microphone and filter
sounds from the side. This allows you to record a lecture or a speech
over a long distance
(see also chapter 9.1.4 Set microphone sensitivity,
page 39) .
5.1.4 Using the pre-recording function
The pre-recording function allows to record the last five seconds
before you press the record key. The device switches into a standby
mode and records a five-second loop without saving it. Press the
record key to save the five-second loop. This feature allows you to
spontaneously record important parts of a conversation.
1
Switch on the pre-recording function (see also chapter 9.1.9
Enabling/disabling the pre-recording function, page 42) .
2
Press the
g
key.
X
The device switches into a standby mode and records a five-
second loop without saving it.
3
Press the
g
key.
X
The unit starts recording and saves the five-second loop.