English
AUX/ UPnP/SLEEP
AUX (Listening to an external
source, on Center only)
You can listen to the sound of the connected
external device through your WAC5 Center.
1
Check the external device has been properly
connected (See
Installation, Connecting an
additional appliance
)
2
Check the WAC5 Center has been properly
connected to an additional appliance with
powerful speakers (See
Installation,
Connecting an additional appliance
)
3
Check the WAC5 Center is switched on or to
standby (See
Basic functions, Switching on/
to standby and selecting functions,
Switching to Eco power/ on
)
4
Press
SOURCE
once or more to select
AUX
(on the remote control, press
TUNER/AUX
once or more)
5
Press the
PLAY
key on the connected device to
start playback.
6
To adjust the sound and volume, use the sound
controls on your external device.
UPnP (on Station only)
After connecting your WAS5 to an existing
network, you can set up a UPnP* server in the
network. Play from your WAS5 stations the
music collection either on the Center or on the
UPnP server.
*
Univeral Plug and Play (UPnPTM) builds on
standard networking technologies and provides
standardized protocols for a wide variety of
home and small business devices. It allows easy
interoperability of all the devices supporting the
the networking technologies.
●
UPnP server software is installed (e.g.
P
hilips
M
edia
M
anager, Musicmatch® ) and the UPnP
server function is enabled.
To connect a UPnP server
Requirements for the UPnP server:
●
The UPnP device has been connected to the
same network as WAS5.
If the WAS5 Station is now connected to
Center,
1
Check the Center is switched on or to standby
mode
2
Check your UPnP-enabled PC is switched on
3
Switch on the Station
4
To select
Select Server
on Station
a. On the remote control, press
MENU
.
b. Use the navigation controls
3
or
4
and
2
to
select
➜
On the Station ‘s display shows the list of
servers connected
➜
Server not found
appears if there is no
UPnP ser ver in the network
5
Use the navigation controls
3
or
4
and
2
to
select your desired server
➜
On the Station ‘s display shows PC’s music as
it does on PC
If the WAS5 Station has ever been
connected to Center, but is now
disconnected from Center
1
Connect WAS5 to the power supply
➜
Display shows: “
Connecting to Center...
”
2
To connect to a UPnP server, press
MENU
or
STOP
on the remote control
➜
Display shows the selection screen of
Installation Mode
or
Select Server
WACS5_Eng/37
8/3/2005, 15:13
39
