Philips Streamium WACS4500, User Manual

Page: 2 / 55

Important notes for users in the
U.K.
Mains plug
This apparatus is fitted with an approved 13-
Amp plug.To change a fuse in this type of
plug, proceed as follows:
1 Remove fuse cover and fuse.
2 Fix the new fuse which should be a BS1362 5-
Amp, A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug should be fitted in its place.
If the mains plug contains a fuse, it should have
a value of 5 Amp. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5 Amp.
Note:The severed plug must be disposed, so as
to avoid a possible shock hazard due to it being
inserted into another 13-Amp socket.
How to connect a plug
The wires in the mains lead are coloured
using the following codes: blue = neutral (N),
brown = live (L).
●
As these colours may not correspond with
the colour markings identifying the terminals
in your plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make sure
that the cord grip is clamped over the sheath
of the lead and not simply over the two
wires.
Copyright in the U.K.
Recording and playback of any materials may
require consent. See Copyright Act 1956 and
The PerformerbØ Protection Acts 1958 to
1972.
2
pg001-pg051_WACS4500_Eng-79 2006.11.29 15:50 Page 2