34
Step 1:
Forehead Sensor Band Cleaning
• Unsnap the forehead sensor band to remove it from headband.
• Submerge the forehead sensor band into a solution of dish soap and water. A soft
bristled brush may be used.
• Rinse thoroughly.
Step 2:
Deep Sleep Headband Cleaning
• Using 3 pre-moistened facial/makeup remover towelettes, clean the wipeable inner lining. Use a minimum
of 3 towelettes.
Step 3:
Visually inspect the forehead sensor and the Deep Sleep Headband for
cleanliness. Repeat the cleaning steps as necessary until visibly clean.
Step 4:
Allow the forehead sensor and the Deep Sleep Headband to air dry before next
use.
Note:
When putting the forehead sensor pad back onto the headband, make sure the cut-
out aligns with the Bone Conduction Technology. Refer to diagram on page 23 if needed.
