62
Philips · LaserMFD 6135hfd
EN
Updating Firmware
· Updating Firmware
Updating Firmware
Updating Firmware
The firmware defines the basic functions and capabilities
of your device. Sometimes also referred to as the device
driver. We constantly strive to implement improve-
ments and innovations. Check our homepage
www.philips.com for information on the current
firmware version available for your device.
Do not interrupt power supply
Settings will be Deleted
1. Load the firmware from the specified internet page
and save the file directly in the root directory of the
USB storage medium (= highest directory level).
The file shall not be saved in a folder.
2. Connect the USB storage medium with the
firmware file to the USB host connection port.
3. If the device detects the firmware file, a message ap-
pears on the display. Press
o
to update firmware.
4. This process can take a few minutes. The devices
re-boots twice. On completion of the procedure,
the device starts the initial installation process (see
also chapter
Initial Installation
, page 15).
Removing USB Storage Media!
Changing the Toner
Cartridge
· Changing the Toner Cartridge
Toner Level Memory
Your device registers the extent of toner used for every
print-out and calculates the toner level of the toner car-
tridge on that basis. The toner level is stored in each
toner cartridge. You can use different toner cartridges
as well as display the respective toner level of the toner
cartridge.
Toner Cartridge 3
Use Original Consumable Materials!
Observe Packaging Instructions
1. Open the upper device cover by gripping the cover
on the arrow marks on the outside and lift upwards,
Calling the Web Interface
You can also edit the device firmware with the
device's web interface (see also chapter
Web In-
terface
, page 18).
CAUTION!
Do not interrupt power supply
Do not switch the device off during the print
process and do not unplug the device from
the power supply. If the Firmware update is
not carried out error-free, your device will
probably no longer function properly.
Wait until the firmware update is completed
before performing more operations on your
device.
CAUTION!
Settings will be Deleted
Depending on the firmware version of your
device, all modified settings are deleted during
a firmware update and reset to factory set-
tings. If the settings are deleted, you will need
to calibrate the scanner again (see also chap-
ter
Calibrating the Scanner
, page 67).
CAUTION!
Use Only Original Firmware
When carrying out a Firmware update
only use the Firmware file for your device
from the website: www.philips.com. Using
other Firmware files can lead to your de-
vice not functioning properly. Sagemcom
accepts no liability for device malfunctions
which can be traced back to the use of
third party Firmware.
CAUTION!
Removing USB Storage Media!
Never pull out the storage medium while the
device is accessing it. If the Firmware update is
not carried out error-free, your device will
probably no longer function properly.
DANGER!
Escaping Toner Dust!
Never open a toner cartridge. If toner dust is
released into the air, you should avoid allow-
ing it to contact your skin and eyes. Do not in-
hale the released toner dust. Remove the
toner dust from clothing or objects with cold
water; hot water would only cause the toner
to set. Never remove loose toner dust with a
vacuum cleaner.
CAUTION!
Use Original Consumable Materials!
Use only original consumable materials. These
are available from a specialised retailer or
through our order service. Other consumable
materials can cause damage to the device.
CAUTION!
Observe Packaging Instructions
Follow the instructions on the packaging of
the consumable materials.
