
Initial Operation · Removing Packaging Material
13
EN
3. Remove the toner cartridge by gripping the handle
in the middle and pulling it forwards out of the de-
vice
4. Remove the tape and protective paper,
but do not
remove the protective strip from the car-
tridge yet
.
5. Shake the new toner cartridge back and forth sev-
eral times in order to distribute the toner evenly,
thereby improving the print quality.
6.
Only after
completely pull off the protection strip
located on the left side of the cartridge.
7. Place the toner cartridge into your device. The car-
tridge should snap securely into position.
8. Close the device.
9. Close the upper device cover.
DANGER!
Escaping Toner Dust!
Never open a toner cartridge. If toner
dust is released into the air, you should
avoid allowing it to contact your skin and
eyes. Do not inhale the released toner
dust. Remove the toner dust from clothing
or objects with cold water; hot water
would only cause the toner to set. Never
remove loose toner dust with a vacuum
cleaner.
DANGER!
Escaping Toner Dust!
Once you have removed the protection
strip, do not shake the toner cartridge any
more. Otherwise, it is possible that toner
dust will be released into the air.
CAUTION!
Toner Cartridge Not Inserted
Correctly!
If the device cover would not close, the
toner cartridge is not inserted correctly.
Take the toner cartridge out and insert it
again correctly.