Philips SE145 User Manual Download Page 40

Page: 40 / 46

11 Frequently asked

questions

Charging

The

icon is not blinking

when the handset is placed
on the base

• Bad battery contact – move

the handset slightly.

• Dirty contact – Clean the

battery contact with a cloth
moistened with alcohol.

• Battery is full – no need to

charge.

Calls

No dialling tone

• No power – check the

connections. Reset the
phone : unplug and plug back
in the mains.

• Batteries are empty – charge

the batteries for at least
24 hours.

• You are too far from the base

– move closer to the base.

• Wrong line cable – use the

line cable provided.

• Line adaptor (when needed)

is not connected to the
line cord – connect the line
adaptor (when needed) to
the line cord.

Poor audio quality

The base is too close to
electrical appliances, reinforced
concrete walls or metal
doorframes – move the base at
least one metre away from any
electrical appliances.

The

icon is blinking

• Handset is not registered

to the base – register the
handset to the base.

• You are too far from the base

– move closer to the base.

No ring tone

The ring tone is deactivated.
Increase the volume.

Caller Line Identifi cation
(CLI) service does not work

Check your subscription with
your network operator.

Frequently asked questions

www.philips.com/support

SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:38

08.10.2007 12:03:52

Summary of Contents for SE145















































Search results

Summary of Contents for SE145

Reviews:

Related manuals for SE145

Brands by name

Popular brands

Philips SE145, User Manual

Search results

Summary of Contents for SE145

Reviews:

Related manuals for SE145

Brands by name

Popular brands