Philips SE145, User Manual

Page: 17 / 46

15
2
Plug the other ends of the
line cord and power cable
into the telephone socket
and mains power socket.
3. 3 Install and charge the
handset batteries
Warning
• The handset must be charged
for at least 24 hours before
using it for the fi rst time.
• Never use any battery type
other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.
Your SE145 is supplied with
two rechargeable batteries.
1
Slide off the battery door
(if fi tted).
2
Insert the batteries as
indicated and slide the door
back on.
3
Place the handset face up
on the base to charge.
A beep confi rms the handset
is placed correctly and
charging will begin.
4
When there is enough
power in the batteries, the
handset will automatically
register with the base.
The standby screen is
displayed. Or if the display
shows
you must select
the country grouping for your
area.
Getting started
SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:15 SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:15 08.10.2007 12:03:35 08.10.2007 12:03:35