Philips SE145, User Manual

Page: 30 / 46

28
6.5 Recall mode
The button is used with
certain network services and
PABX*/switchboard services.
You will not normally need
to change this setting unless
advised to do so.
Note
The use of your SE145 cannot
be guaranteed on all PABX.
1
Press fi ve times.
The display shows FLASH
and the current setting
2
Press or to switch
between
1 (Flash 1 with Time break
recall, or
2 (Flash 2 with Time break
recall).
3
Press to save the
settings.
4
You can now adjust Auto-
prefi x or press to
return to standby.
6.6 Auto-prefi x
You can set the SE145 to detect
a dialling number and replace
it with another number. The
total of both numbers together
can be up to a maximum of
24 digits.
1
Press six times.
The display shows (
------
------
).
2
In the fi rst set of spaces,
enter the number you
want to be detected (max.
4 digits).
Press or to move
the cursor.
3
Move the cursor to the
beginning of the second set
of spaces.
4
Enter the number you want
it replaced with.
5
Press to save.
6
You can now change the
system PIN or press to
return to standby.
Personal settings
SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:28 SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:28 08.10.2007 12:03:44 08.10.2007 12:03:44