26
Philips · HDP2510
Wall colour correction
Colour correction of the projected image to
adjust to coloured projection surface.
Advanced colour settings
Adjust detailed colour corrections.
Colour temperature
– set to
Warm
to
enhance hotter colours such as red, set to
Cool
to make picture bluish or set to
Natural
.
Dynamic contrast
– adjusts the contrast to
keep it at the best level according to the
brightness of the screen.
Gamma
– adjusts the gamma correction
according to the type of the projected
image:
Gamma 2P2/2P4/2P4, Linear,
Enhanced, MaxBright, Enphoto, Photo,
Gamma 1, 2, 3.
Black level
– set the black and white level to
Full range
(RGB),
Limit range
(YCbCr and
RGB) or to
Auto
.
Manual White Point
– manually adjusts the
white point calibration according to your
needs:
Colour, Offset, Gain
.
Manual colours RGB CMY
– manually
adjusts colours in RGB CMY mode according
to your needs:
Colour, Hue, Saturation,
Brightness
.
3D settings
3D
Sets the picture modes with 2D/3D options.
L/R Swap
Changes the side of the screen display.
Sound settings
Volume
Adjusts the volume: 0 – 20.
Deep bass
Switches the deep bass
On
and
Off
.
Wide sound
Switches the wide sound
On
and
Off
.
Equalizer
Selects the equalizer mode:
Normal, Pop, Rock, Jazz, Classic, Voice
.
Speaker
Switches the speaker
On
and
Off
System settings
Keystone
Minimizes the Keystone effect,
Projection mode
Adjusts the projection mode.
Front
– normal projection; the device is
located in front of the projection surface/
screen.
Rear
– rear projection; the device is located
behind the projection surface; the image is
reflected horizontally.
OK
Source
Image
3D
Sound
System
Information
2D/3D
L/R Swap
2D
Off
3D settings
OK
Source
Image
3D
Sound
System
Information
Volume
Deep bass
Wide sound
Equalizer
Speaker
6
On
On
Normal
On
Sound settings
OK
Source
Image
3D
Sound
System
Information
Key stone
Projection mode
Sleep mode
Screen saver
Auto power down
Reset lamp timer
Language/language
Shop mode
Firmware update
0
Front
Off
1 min
On
English
Off
Off
System settings
