Philips S7980, Manual

Page: 27 / 64

5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
2
1
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining ring.
- Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.
1
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
7
Attach the shaving head holder to the bottom
part of the shaving unit (‘click’).
8 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds.
Replacing the cleansing brush
The brush head should be replaced every 3
months or earlier if the brush hairs are deformed
or damaged. As an extra reminder, the notification
symbol also lights up when the brush head should
be replaced. This advice is also available in the
app.
27
English