Philips RQ1250, User Manual

Page: 63 / 68

Problem Possible cause Solution
Specific types only: The Jet Clean
System has not cleaned the shaver
properly, because the cleaning fluid
in the cleaning chamber is soiled or
the cleaning fluid level is too low.
Clean the shaver thoroughly
before you continue shav-
ing. If necessary, clean and
refill the cleaning chamber
(see chapter ‘Cleaning and
maintenance’).
The shav-
er does not
work when I
press the on/off
button.
The rechargeable battery is empty. Recharge the battery
(see chapter ‘Charging’).
Specific types only: The travel lock
is activated.
Press the on/off button for
3 seconds to deactivate the
travel lock.
The shaving unit is soiled or dam-
aged to such an extent that the
motor cannot run. In this case, the
shaving unit symbol, the tap symbol
and the exclamation mark flash.
Clean the shaving unit or
replace it (see chapters
‘Cleaning and maintenance’
and ‘Replacement’).
The temperature of the shaver is
too high. In this case, the shaver
does not work and the exclamation
mark on the display flashes.
Switch off the shaver and let
it cool down. As soon as the
temperature of the shaver has
dropped sufficiently, you can
switch on the shaver again.
RQ1285,
RQ1260/21,
RQ1250/21
only: The shaver
is not entirely
clean after I
clean it in the Jet
Clean System.
The cleaning fluid in the cleaning
chamber is soiled.
Empty and rinse the clean-
ing chamber and refill it with
new cleaning fluid.
The cleaning fluid level is too low.
If the fluid volume in the cleaning
chamber drops below the minimum
level during the cleaning program, the
program aborts.The cleaning light
and the ‘cleaning chamber empty’
symbol flash at intervals and the
holder returns to its starting position.
Refill the cleaning chamber
with cleaning fluid to a level
between the two lines (see
chapter ‘Cleaning and main-
tenance’).
english
63