Philips RQ1250, User Manual

Page: 46 / 68

2 Unfold the charger (‘click’).
3 Put the adapter in the wall socket.
4 Put the shaver in the charger.
,
The display shows that the shaver is charging (see
chapter ‘The display’).
charging in the Jet clean system (RQ1285,
RQ1260/21, RQ1250/21 only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the
back of the shaver pointing towards the holder.
Note: The shaver cannot be placed in the Jet Clean System when
the protection cap is on the shaving unit.
4 Place the shaver body in the holder behind the two clips
(1) and press it down until it locks into place (2).
,
The display shows that the shaver is charging (see
section ‘Charging’ in chapter ‘The display’).
english
46