13
Step 3.
• Install the console mast cover (31) onto the console mast (2) making
sure it is facing the correct direction as in the picture below. Run the
two wire harnesses (44 & 45) through the bottom of the console mast
tube and out the top opening.
• Slide the console mast into the receiving tube (1) being careful and not
pinch the wires. Fasten the console mast with six bolts (68) on each
side, and four flat washers (76) on the side of tube and two curved
washers (83) on the front of tube. Snap the console mast cover in
place.
• Install the front handlebars (3) onto the console mast with two bolts
(113), two split washers (82) and two flat washers (76).
Part Type
Description
Hardware for step 3
Qty
68
76
82
83
113
Hex head bolt
Flat washer
Split washer
Curved washer
Socket head cap bolt
5/16" × 5/8"
Ø5/16"
Ø8 × 1.5T
Ø5/16"
M8 × 25m/m
6
6
2
2
2
83
76
68
68
76
68
31
44
45
1
3
76
113
82
2
112
122
