Philips QS6162/32, Manual

Page: 35 / 48

5 Press the shaving head on/off button once to
switch on the shaving head.
,
The on/off button lights up to indicate that the
shaving head is operating.
6 Place the shaving head on the skin and move
the appliance against the direction of hair
growth while you press it lightly.
Note: Rinse the shaving head under the tap regularly
to ensure that it continues to glide smoothly over your
skin.
7 To switch off the shaving head after use, press
the shaving head on/off button again.
8 Clean the shaving head (see chapter ‘Cleaning
and maintenance’, section ‘Quick cleaning the
shaving head after wet shaving’).
Note: Make sure you rinse all foam or shaving gel off
the shaver.
Dry shaving
1 Hold the appliance in the shaving position, with
the shaving head pointing upwards and the
trimming head pointing downwards.
ENGLISH
for extra skin comfort, or use the shaving head
dry for extra convenience.
Note: We advise you to use the shaving head with
shaving gel or foam when you use it for a wet shave.
Do not use thick shaving cream or shaving oil with this
shaver.
- For optimal shaving results, make circular
movements during use.
- Make sure that the shaving head is in full contact
with the skin.
- You can switch on the shaving head while the
trimming head is operating. If you do this, the
trimming head is switched off immediately.
- Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
Wet shaving
1 Apply some water to your skin.
2 Apply shaving foam or shaving gel to your skin.
3 Rinse the shaving unit under the tap to ensure
that the shaving unit glides smoothly over your
skin.
4 Hold the appliance in the shaving position, with
the shaving head pointing upwards and the
trimming head pointing downwards.
ENGLISH
34