Philips QS6162/32, Manual

Page: 37 / 48

Only clean the appliance and the adapter with the
cleaning brush supplied.
Note: The trimming head and shaving head do not
need any lubrication.
Cleaning the trimming head
1 Switch off the appliance.
2 Pull the comb off the trimming head.
3 Clean the trimming head under the tap.
Cleaning the trimming head connector
Note: Make sure that you clean the trimming head
connector at least once every three months.
1 Switch off the appliance.
2 Gently pull the trimming head off the appliance.
3 Remove the hairs from the inside of the
trimming head connector with the cleaning
brush.
ENGLISH
2 Press the shaving head on/off button once to
switch on the shaving head.
,
The on/off button lights up to indicate that the
shaving head is operating.
3 Place the shaving head on the skin and move
the appliance against the direction of hair
growth while you press it lightly.
4 To switch off the shaving head after use, press
the shaving head on/off button again.
Overload protection
If you press the trimming head or shaving head too
hard onto your skin or if its cutters gets blocked
(e.g. by clothes etc.), the on/off button of the
blocked trimming head or shaving head fl ashes
quickly and the appliance switches off automatically.
Remove whatever is blocking the cutters before you
use the appliance again.
Cleaning and maintenance
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
ENGLISH
36