Philips QCG1.0S, Service Manual

Page: 17 / 68

Alignments EN 17 QCG1.0S LA 6.
2009-Feb-20
Date and time
Schedule
Monitor ID
DDC/CI
Smart power
Advanced option reset
6.3. 8 Factory Setting defaults
Remark: The entry for the factory setting is not visible, but is
located below the Advanced option menu. This menu is only
available when the set is in factory mode.
Note:
1. This function turns enables a monitor to burn in without an
input signal by showing the following burn in pattern cycle:
white, black, red, green, blue.
Hours running
Factory reset
ADC adjust
Dsub ADC adjust
BNC ADC adjust
YPbPr ADC adjust
Video ADC adjust
ADC alignment for ANALOG inputs
1. Enter the Factory mode as described in section Factory
Mode .
2. Enter the Factory Setting defaults.
3. Go to item “ADC ADJUST”.
4. Select proper input to adjust.
5. Select “AUTO SETUP” and press “SET”.
6. ADC is aligned.
Setting Range Default value
Year 2000/2099 2000
Month 01-12 01
Day 01-31 01
Hour 00-23 00
Minute 00-59 00
Daylight saving time On/off Off
Setting Range Default value
Schedule setting by user - -
Setting Range Default value
Monitor ID - 1
Setting Range Default value
DDC/CI On/Off On
Setting Range Default value
Smart power Medium/
High/Off Off
Setting Range Default value
Advanced option reset Yes/No No
Setting Range Default value
Burn in On/off (see note 1) Off
Hours running Submenu -
Factory reset Submenu -
ADC adjust Submenu -
Brightness Submenu -
Color
temperature Submenu -
Input timing Submenu -
Baud rate 2400, 4800, 9600, 19200,
38400, 57600, 115200 9600
EDID write
protect On/off On
ISP mode On/Off Off
OSD display On/off On
Frame lock On/off On
DDR control Submenu N/A
Version Submenu -
SSC Submenu N/A
Setting Resetable Default value
Resetable on Yes Monitor power on
time
Unresetable on No monitor power on
time
Setting Range Default value
Factory reset Yes/No No
Setting Range Default value
D sub ADC adjust Submenu -
BNC ADC adjust Submenu -
YPbPr ADC adjust Submenu -
Video ADC adjust Submenu -
Setting Range Default value
Auto setup - -
ADC R-gain 0-255 255
ADC G-gain 0-255 255
ADC B-gain 0-255 255
ADC R-offset 0-255 96
ADC G-offset 0-255 91
ADC B-offset 0-255 92
Setting Range Default value
Auto setup - -
ADC R-gain 0-255 255
ADC G-gain 0-255 255
ADC B-gain 0-255 255
ADC R-offset 0-255 96
ADC G-offset 0-255 91
ADC B-offset 0-255 92
Setting Range Default value
Auto setup - -
ADC R-gain 0-255 255
ADC G-gain 0-255 255
ADC B-gain 0-255 255
ADC R-offset 0-255 96
ADC G-offset 0-255 91
ADC B-offset 0-255 92
Setting Range Default value
Auto setup - -
Y-gain 0-2048 1024
Y-offset 0-255 0
Color 0-2048 1024
IRE 0-255 0