Service Modes, Error Codes, and Fault Finding
EN 20
Q528.1E LA
5.
the customer wants to make use of the HDMI functionality,
the SSB has to be replaced.
•
Tuner frequency.
Indicates the frequency the transmitter
is tuned to.
•
TV
S
ystem.
Gives information about the video system of
the selected transmitter. In case a DVBT signal is received
this item will also show ATSC.
–
BG: PAL BG signal received
–
DK: PAL DK signal received
–
L/La: SECAM L/La signal received
–
I: PAL I signal received
–
M: NTSC M signal received
–
ATSC: ATSC signal received
–
DVB : DVBT signal received
•
12NC one zip
S
W.
Displays the 12NC number of the one-
zip file as it is used for programming software in production.
In this one-zip file all below software versions can be found.
•
Initial main
S
W.
Displays the main software version which
was initially loaded by the factory.
•
Current main
S
W.
Displays the built-in main software
version. In case of field problems related to software,
software can be upgraded. As this software is consumer
upgradeable, it will also be published on the Internet.
Example: Q581E_1.2.3.4.
•
Flash utils
S
W.
Displays the software version of the
software which contains all necessary components of the
download application. To program this software, EJTAG
tooling is needed. Example: Q581E_1.2.3.4.
•
S
tandby
S
W.
Displays the built-in stand-by processor
software version. Upgrading this software will be possible
via ComPair or via USB (see chapter Software upgrade).
Example: STDBY_3.0.1.2.
•
MOP
S
W
. Only applicable for US. At the time of release of
this manual, there was still a problem with this item, and
some rubbisch was displayed. Ignore this.
•
Pacific 3 Flash
S
W.
Displays the Pacific 3 software
version.
•
NVM version.
Displays the NVM version as programmed
by factory.
•
Display parameters.
for development purposes only.
•
Private PQ parameters.
for development purposes only.
•
Public PQ parameters.
for development purposes only.
•
Ambilight parameters.
for development purposes only.
•
Acoustics parameters.
for development purposes only.
•
DFI software (if applicable).
Displays the DFI EPLD
software.
•
DFI ambilight software (if applicable).
Displays the DFI
ambilight EPLD software.
How to Exit CSM
Press “MENU” on the RC-transmitter.