Philips PS24FHDCR, User Manual

Page: 31 / 46

6. Important information
Manufacturing country
The manufacturing country of the product is indicated on the product label ( “Made in …” ).
Importers contact information
To fi nd your local importer, contact one of Barco’s regional of fi ces via the contact information provided on
our website ( www.barco.com ).
FCC class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modi fi cations not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Canadian notice
CAN ICES-1/NMB-1
6.4 EMC notice
Electromagnetic emissions
The PS24FHDCR is intended for use in the electromagnetic environment speci fi ed below. The customer
or the user of the PS24FHDCR should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment –
Guidance
RF emissions
CISPR 11
Group 1 The PS24FHDCR uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
N/A (power consumption less than
75W)
Voltage fl uctuations/ fl icker
emissions
IEC 61000-3-3
Complies
The PS24FHDCR is suitable
for use in all establishments,
including domestic establishments
and those directly connected to
the public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
K5902096 (451920611523) PS24FHDCR 08/03/2018 29