Philips ProntoPro NG User Manual Download Page 49

Page: 49 / 70

User Guide

Using the Power Features

To set the cursor navigation:

1 Tap and hold the

ProntoPro NG

icon

in the upper left corner of the

touch screen for 3 seconds.

The Tools Menu appears.

2 Select the

The first Settings Page appears.

3 Press the

Page Down

hard button at the left side of the ProntoPro NG.

The second Settings Page appears.

4 Tap

in the second Settings Page.

The cursor navigation is enabled. The Toggle hard button is activated.

5 Tap the

ProntoPro NG

icon

in the top center of the touch screen to

exit the Settings Tool.

To use the cursor for navigating the ProntoPro NG:

1 Press the

Left

and

Right

buttons of the cursor.

ProntoPro NG navigates through the devices.

2 Press the

and

Down

buttons of the cursor.

ProntoPro NG navigates through the pages.

3 Press the

Toggle

button to easily switch from navigating on

ProntoPro NG to control audio/video equipment.

The

Device Left

and

Device Right buttons

appear in the top area of the

touch screen and the cursor is used for controlling audio/video equipment.

4 Press the

Toggle

hard button again to switch back to cursor navigation.

TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 49

Summary of Contents for ProntoPro NG







































































Search results

Summary of Contents for ProntoPro NG

Reviews:

Related manuals for ProntoPro NG

Brands by name

Popular brands

Philips ProntoPro NG, User Manual

Search results

Summary of Contents for ProntoPro NG

Reviews:

Related manuals for ProntoPro NG

Brands by name

Popular brands