17
1
Put the small plug in the shaver.
2
Put the plug in the wall socket.
,
The charging light goes on to indicate that
the appliance is charging.
3
Remove the plug from the wall socket and
pull the small plug out of the shaver when
the battery is fully charged.
Note: The shaver does not run from the mains.
When the battery is empty, you have to recharge
the battery before you can use the shaver again.
Note: The light of the shaver does not change
color and does not go out when the shaver is fully
charged.
Cordless shaving time
A fully charged shaver has a cordless shaving
time of approximately 30 minutes.
Using the appliance
The shaver cannot be used directly from the
mains.
1
Remove the protection cap.
ENGLISH
2
Push the on/off slide upwards to switch on
the shaver.
3
Move the shaving heads over your
skin. Make both straight and circular
movements.
Note: Shave on a dry face only. Do not use the
shaver in combination with gel, foam or water.
Note: Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
4
Push the on/off slide downwards to switch
off the shaver.
5
Clean the shaver after every shave (see
chapter ‘Cleaning and maintenance’).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as petrol or
acetone to clean the appliance.
Clean the shaver after every shave to
guarantee better shaving performance. For
the best cleaning result, we advise you to use
Philips Cleaning Spray. Ask your Philips dealer
for information.
After every shave: shaving unit and hair
chamber
1
Switch off the shaver, remove the plug
from the wall socket and pull the small
plug out of the shaver.
ENGLISH
