PDS-60ca Product
Guide
2
PDS-60ca
Power/data supply for indoor and outdoor applications
•
PDS-60ca is available in 7.5 V and 24 V
versions to meet the power requirements
of a variety of luminaires. Both 7.5 V and 24
V versions communicate control data via
Ethernet and DMX networks, allowing for
compatibility with the full range of Philips
Color Kinetics and third-party controllers.
• Features a NEMA 4 (IP66) enclosure, PDS-
60ca installs in dry, damp, and wet locations.
• Accommodates input voltages ranging from
100 VAC to 240 VAC. Short circuit protection
prevents device failure due to incorrectly
wired luminaires.
• PDS-60ca is available in a pre-programmed
version, which features built-in visual effects
and allows for light show configuration
without controllers.
• Offers multiple standard-size conduit entries
to accommodate 1/2 in and 3/4 in US trade-
sized conduit.
• PDS-60ca Pre-Programmed functions as
a master controller, delivering data to the
other power/data supplies in the run. Use one
PDS-60ca Pre-Programmed unit per run, and
standard additional power/data supplies. A
downstream power/data supply does not have
to be a PDS-60ca, but can be any DMX- or
Ethernet-based power/data supply.
• Instead of attaching luminaires to a Pre-
Programmed PDS-60ca, you could use it as an
outdoor-rated light show controller for DMX-
or Ethernet-based power/data supplies and
their luminaires.
Compatible Luminaires
Device
Luminaire
Max. Quantity
Per Device
PDS-60ca 7.5 V
iColor Flex MX gen2
144 nodes
PDS-60ca 24 V
eW Flex Micro
120 nodes
eW Flex Compact
60 nodes
iColor Flex LMX gen2
60 nodes
PDS-60ca is a versatile power/data supply designed for indoor and outdoor LED lighting luminaires employing
low voltage luminaires from Philips Color Kinetics.
Versatile power/data supply
for indoor and outdoor
applications
The device’s NEMA 4 (IP66)
enclosure allows for installation in
dry, damp, and wet locations.
Version
Features
PDS-60ca 7.5 V
DMX/Ethernet
Compatible with both DMX and Ethernet
networks. On-board indicators show the
status of the data connection.
PDS-60ca 24 V
DMX/Ethernet
PDS-60ca 7.5 V
Pre-Programmed
Has configurable, on-board effects. Cannot
receive controller data, but can send data
to downstream power/data supplies and
connected
luminaires
.
PDS-60ca 24 V
Pre-Programmed
Versions and Features
