32
H
in
ts & t
ip
s
3
Open the cartridge holder.
4
Remove the empty cartridge.
5
Take the ink cartridge out of its packaging
and remove the protective strip. Be careful
not to touch the nozzles and the contacts.
6
Insert the cartridge with the “nose” down into
the cartridge holder—the
black
cartridge
right
and the
colour cartridge left
.
7
Close the cartridge holder. You will hear a
click when it snaps shut.
8
Close the machine.
9
Insert the chip card “ Plug’n’Print” with the
contacts facing up into the slot below the
control panel to update the cartridge infor-
mation.
10
The cartridge is loaded when the following ap-
pears on the display:
Action
completed
Remove
card
Cartridge capacity
The machine records ink consumption and from
this calculates the amount left.
v
The amount left is only valid if you load
each new cartridge with the chip card sup-
plied.
Press
M
,
73
and
OK
. Press
/
to see the
current capacity of the black and the colour
cartridges.
Logs
The logs list contains the last 30 transmissions
(faxes sent and received and SMS messages). A
report will be automatically printed after every 30
transmissions. However, you may request a print-
out at any time.
Press
M
,
52
and
OK
. The logs are printed.
Commands
Your device will
fi
le all transmission commands
(including faxes ready for polling or for delayed
sending) in a list known as the waiting queue.
