Philips medication dispenser, User Manual

Page: 46 / 63

41
Special Installations
8. Repeat the above two steps to select the messages for the remaining doses of
the day. Once all messages have been selected, the display will show:
“No” will be blinking .
9. This screen allows you to define whether the dose is a reminder message or
a cup of medicine. You also define the time for this dose. Use the right or
left arrow key to move around and the up or down arrow key to change the
selections. Once all the information has been entered, press the “OK” key.
10. Repeat the above step to make selections for the remaining doses of the day.
Once you have defined one day, the display will show:
“Yes” will be blinking.
11. If the same schedule is to be followed for an entire week, press the “OK” key
to select “Yes.” Otherwise, use the right or left arrow key to select “No”
and then press “OK.” You will then have to repeat the above process for the
other days of the week.
12. The display will then show:
“Off” will be blinking .
13. Press the “OK” key to continue. For further information about the PRN
operation, please contact the Support Center. The display will show:
The next step is preparing and loading medication . Please refer to page 9 .